60 Hz
FAN DOUBLE INLET
MANUFACTURING FEATURES:
• Galvanised steel sheet housing.
• Polyamide impeller reinforced with fibreglass in models 7/7, 9/9, 10/10 and 12/12. The impeller of the rest of models are made of galvanised steel sheet.
• Double inlet forward curved impeller in all models.
• Supplied with mounting feet (included in price). Except 15/15 which is a cubic model.
•Exclusive system Casals fixing motor and turbine fan by flexible arms silent blocks to avoid any vibration. Arms in compliance with ROHS regulations 2002/95 / EC (Restriction of Hazardous Substances in electrical and electronic equipment)
•Closed motors specially designed Casals: extruded aluminum housing, all protected inside the terminal box on the motor IP 65 protection and motor with IP54 protection and Class F insulation standard voltages: 230V 60Hz single phase
APPLICATIONS:
Designed for assembly in equipment:
• Ventilation boxes and air handling units.
• Centrifugal heaters.
• Industrial and professional kitchen hoods. Use in supply or extraction with prior fat filtering.
• Maximum working temperature: 50ºC.
UNDER REQUEST
• Impeller made of galvanized steel sheet.
• MBI assembled
| A | B màx | C | D | E | F | G | H | I | J | N | X |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 233 | 287 | 262 | 245 | 70 | 19 | 407 | 191 | 376 | 184 | 260 | 202 |
MANUFACTURING FEATURES
• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FRATURES
• Galvanized protection grid on the outlet side to avoid the entry of objects and contact with the impeller.
MANUFACTURING FRATURES
• Motor side protection guard specially designed for low pressure direct driven fans.
• Manufactured in galvanised steel.
MANUFACTURING FRATURES
• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.
MANUFACTURING FEATURES
• To be installed in the outlet of low pressure fans (BD, BV) and made the connection to the duct easier.
• Made of galvanized seel.
UNDER REQUEST
• Possible spot welding on fans outlet.
| Nº | Code | Family | Name | Qty |
|---|---|---|---|---|
| 1 | R-251269421 | CASING | BD9/7 | x1 |
| 2 | R-251269381 | TURBINE | BD 9/7 | x1 |
| 3 | 251279478 | MOTOR+SUPPORTS | BD9/7M4 | x1 |
| 3 | 720331132 | MOTOR | BD M4 0,35kW 230V | x1 |
| 3 | 720331145M042 | MOTOR | 0,6kW 4P 110/230V 60Hz MC T80 | x1 |
| 4 | 960500100 | MOUNTING SUPPORT | S 7/9 | x1 |
+34 972 720 150
Manual