60 Hz
ATEX SQUARE WALL PLATE FAN WITH VARIABLE PITCH BLADES
MANUFACTURING FEATURES
• Square plate made of inox steel AISI 304.
• Variable pitch angle PAGAS impeller.
• Supplied with galvanized motor support and protection guard according to the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipments).
• ATEX standard asynchronous motor. ATEX certified: II2G Ex d, Standard voltages 230V 60Hz for single phase motors and 230/400V 60Hz for three phase motors. IP55 protection.
APPLICATIONS
Designed for wall assembly, they are suitable for:
• Air renewal in buildings and industries.
• Smoke extraction (max. 60ºC).
• General ventilation in closed environments classified as ATEX.
• Working temperature: ambient from -20ºC to 60ºC
UNDER REQUEST
• 60Hz fans and special voltages.
• Stainless protection grid.
__________________________________
ORGANISM: L.O.M.
CERTIFICAT Nº: LOM 17.755X-C
In compliance with the Directive 2014/34/UE
| A | B | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|
| 576 | 521.5 | 340 | 98.5 | 241.5 | 33.5 | 455 | 11 |
Switch for ATEX environments. Suitable for zones 1-2 (gas) and 21-22 (dust), index protection IP65. Manufactured in aluminum alloy and RAL 7000 gray finishing coat. External screws in stainless steel. Control on the front. Tensions up to 690V. According to directive 2014/34 / UE (ATEX).
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
+34 972 720 150
Manual