HC EVO 45 EEC

SHORT CASE VARIABLE PITCH BLADES WITH EEC MOTOR

MANUFACTURING FEATURES
• Short case axial fan with reinforced body, with double flange, made of rolling steel sheet.
• Pad mounted motor support system with guide vanes.
• Polyester powder finishing coat.
• Low sound level and high performance.
• PM brushless motor (permanent magnets), synchronous, electronically commutated, high efficiency and low sound level. Specially designed for fans with electronic operation and control in deported box IP65.
    Working range: from 400 to 1200-2000rpm (depending on the models)
    Motor with IP54 protection and class F insulation. IP 65 drive case
    Power: 220V ± 10% single phase
    Power frequency: 50 / 60Hz
Operating temperature range (electronical box): -20ºC to 50ºC
    Speed control through signal 0-10V or PWM
• Polypropylene impeller with variable pich angle (Stopped and in origin).

APPLICATIONS
Designed for inline installation, they are suitable for

• Air renewal in buildings and industries.
• Smoke extraction.
• Maximum transported air temperature: 50ºC.

UNDER REQUEST
• Casing in hot galvanized sheet or stainless steel.

Fan

Max flow

8860 m³/h

Weight

18 Kg

Motor

Power

0,75 kW

RPM Motor

2000 (máx)

I max. 230 V

5,8

HC EVO 45 EEC

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

HC EVO 45 EEC

A	B	C	D	E	F	G
525	500	452	8x45	12	350	617

HC EVO 45 EEC

HC EVO 45 EEC

Model

INT 25 3P A

Code

INT253PA

Information

SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model

RP 45

Code

960310100

Information

PROTECTION GUARD FOR LONG CASE FANS

CONSTRUCTION FEATURES

• Protective grille on the motor and propeller side to prevent objects from entering. For HC and HCA models, the RP grille is only applicable on the propeller side. The RP is also suitable for the HMR EVO range, both for intake and discharge (note that the grille is of different sizes depending on whether it is for intake or discharge)
• Constructed with electro-welded rod.
• Compliant with ROHS directive 2002/95/EC.

ON REQUEST

• Grille in 304 or 316 stainless steel with electropolished finish.

Model

REGC

Code

FX263300

Information

SPEED CONTROLLER FOR EEC MOTOR

MANUFACTURING FEATURES

• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.