fan image
Model
BOX HBA 71 T4 (A2:6)
Code

BOX HBA 71 T4 (A2:6)

AXIAL IN SOUNDPROOF CABINET

MANUFACTURING FEATURES:

• BOX: Soundproof galvanised steel box with thermo-acoustic insulation, Bs1d0 fire class. Easy motor access and fan maintenance through removable panels.
•Inside fan: HBA : Axial fan, circular reinforced frame from size 45 to 80. For larger sizes uses from 90 to 125 we use model HCA .
Motor-impeller assembly through a modular system. Variable pitch angle cast aluminium impeller. Polyester powder finishing coat.
• Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230V 60Hz for single phase motors, 230/400-460V 60Hz for three phase motors up to 4kW and 400-460/690V 60Hz for higher powers 1 speed and 400V for 2 peed motors.

APPLICATIONS

Designed for wall or duct installation, indoor or outdoor assembly, they are suitable for:
• Air renewal in buildings and industries.
• Smoke extraction
• Maximum working temperature: single phase 50ºC, three phase 60ºC.

UNDER REQUEST

• B form impeller (air flow from impeller to motor).
• 100% reversible impeller.
• Special voltages.
• Fan to move air up to 100ºC.

Fan

Max flow
33410 m³/h
BOX HBA 71 T4 (A2:6)
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

BOX HBA 71 T4 (A2:6)

Dimensions scheme
A B C D E F G H J K L M N O
951,5 951,5 597 800 76 800 76 30 705 650 11 885 35 60

BOX HBA 71 T4 (A2:6)

Electrical scheme

BOX HBA 71 T4 (A2:6)

Model
SFC (GENERIC)
Code
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
INT (GENERIC)
Code
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
AVR (GENERIC)
Code
Information
ANTI-VIBRATION RUBBER BLOCK

MANUFACTURING FEATURES

• Support of great radial and axial elasticity.
• These low-profile, compact and elastic supports control the three directions of movement with large deformations in the rubber.
• It consists of two parallel armour adhered to the bell-shaped rubber and by a base with handles.
• These supports with handles have a threaded hole in their upper frame and are easy to install and fix.
• The steel protection washer allows it to withstand overloads by increasing its rigidity and protects the rubber from dripping hydrocarbons.
• Elastomer type NR or high quality elastomer. Working temperatures between -40ºC and + 70º C.
• Taking into account the tolerances of hardness in the elastomers, the mechanical characteristics of these series may differ.
• Range of 6 sizes and 3 different hardnesses (45-60-75) to fit a load range between 2 Kg and 1300 Kg.
      1. Soft: hardness A 45
      2. Average: hardness B 60
      3. Hard: hardness C 75

APPLICATIONS

• Very appropriate in the elastic suspensions of machines that present vibrations of horizontal components.

Model
AVS (GENERIC)
Code
Information
ANTI-VIBRATION SPRING BLOCK

MANUFACTURING FEATURES

• Metal insulators designed to work with compression with 85% insulation according to the following arrows (travel in mm) and rpm:

Arrow (mm.)          r.p.m.
    20 mm          >600 r.p.m.
    30 mm          >500 r.p.m.

• Made of high quality elastic steel, with rectangular base and rubber mat to improve the grip. It treats of a resistant product and easy assembly, that avoids all type of vibrations of the fans to the structure of the premises.
• Operating temperature from -45 ° C to + 120 ° C.

APPLICATION

• To install under machines with rotating components, ventilation groups, fans, ventilation boxes, etc.

Model
VISERA BOX HB 71-80
Code
VISB0810150
Information
OUTDOOR FLANGE WITH BIRD GUARD FOR BOX HB

MANUFACTURING FEATURES

• Outdoor flange with bird guard for BOX HB.
• Made of galvanized Steel.

Model
CMP-HUT 800x800
Code
CMPHUT58080
Information
DEPRESSION DAMPER (HORIZONTAL or VERTICAL PLACEMENT)

Depression damper for ascending air flow in the intake. The slats block the passage of air when the fan is stopped while when the fan is running the slats move by depression allowing the passage of air. Robust U-shaped frame. The special holes in the corners allow a connection with common union systems on the market such as a duct working in plenum mode. It maintains the overpressure or depression inside a room with respect to the outside or another adjoining room.

MANUFACTURING FEATURES:

- Galvanized steel frame, U-shaped to install in a duct.

- Aluminum slats.

- Ø12 shafts in galvanized steel.

- Ø12 bronze bushings.

- Suitable for 400°/2h (not certified) and temperatures below zero.

- It can be installed directly to the fan, although the use of the frame (B CMP) is recommended.

- Suitable for speed 18 m/s and with some turbulence.