60 Hz
CIRCULAR AXIAL JET FAN 300ºC/2h
MANUFACTURING FEATURES:
The JFC F300 models are composed of an axial fan and two silencers.
FAN:
•Axial fan with reinforced tubular casing, made of steel sheet. The connection box is accessible by the side from a removable door.
•Standard asynchronous squirrel-cage motor with IP-55 protection and Class H insulation, CERTIFIED 300ºC/2h. Standard voltages 400-460V(Y) 60Hz for 1 speed motors and 400V 60Hz for 2 speed motors.
SILENCERS:
•Casing in galvanized steel. Inner duct made of perforated galvanized steel sheet.
•The silencers are filled with mineral wool with high acoustic absorption properties, preventing most of the fan noise to be propagated.
•Unidirectional JFC F300 UN is equipped with a protection guard at the inlet side and a deflector at the outlet. The deflector directs the air away from the ceiling and obstacles like beams or ducting, sweeping the whole volume of air to the closest extraction point.
•Reversible JFC F300 RE is equipped with protection guards on both sides.
APPLICATIONS:
•Conceived for car parkings and large spaces where polluted air, or smoke from an accidental fire, needs to be removed effectively.
•An optimized design minimizes the height needed for their installation and assures a silent operation.
•Maximum working temperature: 60ºC.
UNDER REQUEST
Special voltages
Official homologation by the European laboratory APPLUS according to EN 12101-3:2015
Certification Nr: 0370-CPD-1325
| A | B | F | G | H | I | K | L | M | O | ØC | ØD | ØE | Thrust (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1788,5 | 720 | 8x45º | 348,5 | 415 | 122 | 406 | 356 | 301 | M8 | 415 | 306 | 355 | 23/5,5 |
Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FEATURES
Range designed for suspension of acoustic ceilings and machinery that requires a very high isolation level. These hangers are made of a high mechanical performance spring and incorporate a rubber bush conceived to avoid the acoustic bridges and the contact of a non aligned screw.
The metallic structure is very robust and it is supplied with an anti-corrosive zinc-plated coat.
APPLICATIONS
Support of Equipment for the support of gas or fluid pipes, air ducts and ventilation or air conditioning machinery.
+34 972 720 150
Manual