KIT-PE DAMPER 1 DUAL STAIRSHIELD

Stairs pressurization kit to automatically control the differential pressure and maintain it at 30-50 Pa in a single stage in accordance with the UNE-EN 12101-6 standard.

Made up of a control panel (KIT-PE DAMPER 1 DUAL STAIRSHIELD) and a drive unit (any fan for air supply) that will provide the stairs or the escape route with sufficient pressure.
Available for three-phase and single-phase equipment.
The KIT-PE DAMPER 1 DUAL STAIRSHIELD has everything necessary to function autonomously, so the installer's job will be much easier and he will only have to connect the kit to the fan and to the fire detection control panel.
KIT-PE DAMPER 1 DUAL STAIRSHIELD includes a flow sensor to redundantly ensure air circulation in the system and in the correct direction.

The KIT-PE DAMPER 1 DUAL STAIRSHIELD is composed of the following elements:

Variable frequency programmed to maintain constant pressure.
Maximum output frequency: 50Hz
High precision DPT differential pressure probe
Steel frame fitted with a 3mm double bar lock to limit external access. IP66 protection. Complies with IEC 62208, UL, CUL, BV, DNV and GL standards.
Magnetothermic protector.
Line and error led.
Test button.
Operating mode selector.

Kit according to the new regulations (1/2/24) with a fire brigade panel (COMBATOR)

Allows you to control a motorized regulation damper and two fans with alternative operation. In the case of detecting smoke, the damper will close and the fan that was running will stop. If there is no smoke, but one of the fans fails, there will always be the other to continue pressurizing.

UNDER REQUEST

Maximum output frequency: 60Hz