CTH3-A F400
Model
CTH3-A 250 T4 0,12kW F400
Code
279250106A

CTH3-A 250 T4 0,12kW F400

ROOF FAN, AL COWL,400ºC/2h

MANUFACTURING FEATURES
• Roof cowl made of aluminium
• Structure, roof base support and bird protection guard made of galvanised steel.
• High efficiency backward impeller with self-cleaning system of steel.
• Standard asynchronous motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors, 230/400V 50Hz  in three phase motors and 400V 50Hz in 2 speed motors

APPLICATIONS
Specially designed for roof installation, they are suitable for:
• Smoke extraction.
• Smoke emergency exhaust with motor outside the hazardous area.
• Air renewal in buildings and industries.
• Industrial and professional kitchen hoods.
• Maximum continuous working temperature: carried air 80ºC, environment 60ºC for three phase and 50ºC for single phase motors.



UNDER REQUEST

• 60Hz and special voltages.
• Sparking proof fan with EEx_d certified motor.

 


Official homologation by the European laboratory APPLUS according to EN 12101-3:2015
Certification Nr: 0370-CPR-2656

Fan

Max flow
880 m³/h
Weight
10 Kg

Motor

Power
0,12 kW
RPM Motor
1400
I max. 230 V
0,8
I max. 400 V
0,46
Size
63
Weight
4 Kg
CTH3-A 250 T4 0,12kW F400
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

CTH3-A 250 T4 0,12kW F400

Dimensions scheme
A B aprox C D E F G H I K aprox
463 441,9 435 330 9 203 112,25 30 20,75 278,9

CTH3-A 250 T4 0,12kW F400

Electrical scheme

CTH3-A 250 T4 0,12kW F400

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
INT 400 25A 3P
Code
508902501
Information
SAFETY SWITCH FOR 400ºC/2h

Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.

Model
KF 225-250
Code
960004610
Information
FIXING KIT FOR CTH3

MANUFACTURING FEATURES

• Fixing kit for CTH3 roof fan made of galvanized steel.

Model
KB 225-250
Code
960004510
Information
CTH3 TILTING KIT

MANUFACTURING FEATURES

• Tilting kit made of galvanised steel.
• It allows fan inclination to make cleaning of duct and impeller easier.

Model
KV CTH-3 225-250
Code
960004710
Information
CTH3 VERTICAL DISCHARGE

MANUFACTURING FEATURES

• Accessory to convert the CTH3 roof fan to vertical discharge.
• Manufactured in aluminuim

Model
SFC 230 I 2,5A *
Code
SFC230I003
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 1,2A *
Code
SFC400III1
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
BTI 410
Code
A-50870410XX
Information
INCLINED ROOF FAN SUPPORT

MANUFACTURING FEATURES

• Inclined support for roof fans CTH3, ENKELROOF EEC, KENTALROOF CONFORT, and the resulting fans combining with the KIT TE and KIT TM

In the code, indicate the pitch instead of "XX"

UNDER REQUEST

• Specific inclination.

CTH3-A 250 T4 0,12kW F400

Spare parts scheme
Code Family Name Qty
1 R-279228491 ROOF COWL CTH3-A 225-315 x1
2 721001113 MOTOR 0,12kW T4 B5 230/400V x1
3 R-279259381 TURBINE THRE R69L1 250x56x11 RD x1
4 R-279251772 INLET-FRAME CTH3 250 x1