50 Hz
UP-BLAST TRANSMISSION VERTICAL DISCHARGE ROOF FAN MADE OF ALUMINUM
CONSTRUCTIVE FEATURES
• Up-Blast exhaust fan made entirely of aluminum that guarantees excellent corrosion resistance and minimum weight.
• Oversized Belt & Pulley Transmission (150% of the installed power). Oil and Static resistant belts.
• Bearings 100% factory tested and designed specifically for air movement applications with an L10 rating of 50,000 hours.
• Anti-vibration blocks reduce motion and noise transfer between transmission system and fan housing.
• High-performance aluminum built backward inclined turbine with self-cleaning system to minimize noise and vibrations.
• Q6.3 grade, statically and dynamically balanced fan for long life and quiet operation.
• Specially designed housing for rain protection. Protective grille to prevent entry of objects.
• Drain tube for easy removal of fluids (water and grease).
• Coated motor cable to prevent overheating and ensure long motor life.
• Standardized squirrel cage asynchronous motor with IP-54 protection and class F insulation. Standard voltages 230V 50Hz single-phase and three-phase motors.
• Inox bucket for grease collection, FAT TRAP, available for installation after the drain pipe (as accessori)
APPLICATIONS
Designed for deck or roof mounting, vertical discharg, indicated for:
| A | B | C | D |
|---|---|---|---|
| 1130 | 822 | 50.8 | 838 |
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
| Nº | Code | Family | Name | Qty |
|---|---|---|---|---|
| 1 | 509124000SP01 | MOTOR | STELLAR BLAST 630 (B3) | x1 |
| 1 | 731090701 | BELT | SPAX 907 | x1 |
| 1 | 732111802 | PULLEY | SPA118-2 ( 1610 ) | x1 |
| 1 | 733161024 | TAPER | 1610D24 | x1 |
+34 972 720 150
Brochure