50 Hz
FALSE CEILING HEAT RECOVERY UNITS
MANUFACTURING FEATURES
• Centralized double flow ventilation unit with heat recovery unit for falseceiling installation.The ideal compromise between performance, functions, purchase and operating costs makes the HIDRIDA LP EEC range the most costeffective solution for the ventilation.
• 2 models, different in size and performance provided.
• Casings in galvanized steel sheet integrating the support brackets for false ceiling mounting; interior shell covered in sound-absorbing and fire-resistant heat-insulating material (DIN EN 13501). Tie rods for suspended installation included in the standard equipment.
• Inlet and outlet vents compatible with the combination with tubes with a nominal diameter of 125 mm (HIDRIDA LP 200 EEC ) and 150 mm (HIDRIDA LP 350 EEC).
• Pair of fan motors driven by external rotor EC (brushless) motors, with shafts mounted on bearings balls, directly coupled to backward curved centrifugal impellers to guarantee high aeraulic efficiency. 3 speeds of functioning, independently settable at the time of installation.
• High efficiency heat exchanger, cross-flow counter-flow type, made of plastic resin (PS).
• Antifreeze protection with automatic activation, to prevent the formation of frost at the heat exchanger.
• Thermodynamic, automatic and 100% filtered by-pass, to guarantee occupant comfort. Ideal for half seasons, or in any case when the outside temperature does not require the action of the heat exchanger.
• Three-speed control panel supplied can be housed in a 503 box.
• Pair of ISO ePM10 ≥ 50% (M5) filters ISO ePM1 ≥ 50% (F7) filter available as an option for the delivery duct), easily accessible for repairs periodic maintenance.
• Condensate collection tray with drain devices.
• Degree of protection against dust and water: IPX2.
• Class of electrical insulation:II (earthing is not required).
SOME CONTROL FUNCTIONS
• Remote command group, of the wired connection type, which allows:
• Switching the product on and off.
• The choice of the product’s minimum, average or maximum speed.
• Signaling, by means of an indicator light, of the condition of saturated filters.
APPLICATIONS
Ventilation of residential and commercial premises of up to 90 m2 (HIDRIDA LP 200 EEC) or 240 m2 (HIDRIDA LP 350 EEC).
UNDER REQUEST
• Possibility of installation with external environmental sensors (optional), for the passage for the automatic control of the operating mode.
| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 969 | 240 | 643 | 860 | 551 | 125 |
MANUFACTURING FEATURES
• Thermally insulated flexible duct manufactured with inner tube 3 layers of aluminium and 2 layers of polyester.
• Reinforced internally with spiral steel wire. 25mm mineral wool insulation, exterior coating with aluminium and polyester multilayer pipe that works as an optimal vapor barrier and prevents condensation.
• Classification of fire resistance: M1.
• Maximum working pressure: 3000 Pa.
• Working temperature: -30 to 140ºC.
• Maximum speed: 30m/s.
APPLICATION
• In sections of 10 meters for installations of air conditioning, ventilation and VMC systems
MANUFACTURING FEATURES
• Flexible insulated thermo-acoustic tube made with inner tube 3 layers of aluminium and 2 layers of polyester.
• Reinforced internally with spiral steel wire, 25mm mineral wool insulation, exterior coating with aluminium and polyester multilayer pipe that works as an optimal vapor barrier and prevents condensation.
• Maximum working pressure: 2000 Pa.
• Working temperature: -30 to 140ºC.
• Maximum speed: 30m/s.
APPLICATION
• In sections of 10 meters for installations of air conditioning, ventilation and VMC systems.
Exterior polypropylene anti-insect grille. Diameter 125.
6-hole distribution plenum.
Semi-flexible circular duct with smooth inner surface made of HDPE (high density polyethylene), double wall. Externally self-extinguishing and internally antistatic.
Circular connector for HDPE conduit
Sealing ring for conduit and connector
Anti-extrusion ring.
Plenum box with direct coupling rectangular grid.
Air diffusion grille
Air diffusion grille (for 2 plenums)
Reducing flexible circular duct clamp from 150 to 125mm
Electrical coil.
Electrical coil.
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
Filter cells for rough primary filtration for air treatment units
High filtration area, light filter, rigid and easy to compact. 100% Incinerable and water repellent
Media: synthetic thermo pleated
FiberPlast frame
Maximum temperature in continuos service: 70ºC
Humidity 100%HC
Tested for food contact according to CE 1935/2004
+34 972 720 150
Energy label