50 Hz
CENTRIFUGAL FAN IN SOUNDPROOF BOX WITH SANDWICH PANELS AND ELECTRONIC MOTOR
MANUFACTURING FEATURES
• Impellers made of polyamide reinforced with fibreglass (models 7/7, 9/9, 10/10 and 12/12). Other models made of galvanised steel sheet.
• BD EEC range fans assembled in soundproof cabinets.
• Ventilation box with 30 mm aluminum profile structure, nylon corners, galvanized sandwich panels with internal insulation rockwool (25mm thickness) class A1 (non-combustible) of 90kg/m3 density. All panels are equipped with "fastening system" for the quick assembly and disassembly whenever required, either for cleaning, maintenance or exchanging of panels.
• Connection gland included.
• Easy access through lateral panel.
• Fan can be placed in any position by exchanging panels.
• Motor fixing with an exclusive system designed by Casals through flexible arms and silent blocks to avoid vibration. Flexible arms in compliance with the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipments).
• PM brushless motor (permanent magnets), synchronous, electronically commutated, high efficiency and low sound level. Specially designed for fans with electronic operation and control in deported box IP65.
Working range: from 400 to 1200-2000rpm (depending on the models)
Motor with IP54 protection and class F insulation. IP 65 drive case
Power: 220V ± 10% single phase
Power frequency: 50 / 60Hz
Operating temperature range: -20ºC to 50ºC
Speed control through signal 0-10V or PWM
APPLICATIONS
Designed for inline installation, indoor or outdoor assembly, they are suitable for:
• Air renewal in buildings and industries.
• Maximum working temperature: 50ºC.
UNDER REQUEST
• Position LG0
• Impeller made of galvanized sheet.
| A | B | C | E | F | H | I | J | K | L | M | ØD |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 700 | 700 | 700 | 80 | 170 | 305 | 395 | 640 | 640 | 290.7 | 325.4 | 450 |
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FEATURES
• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.
Weather protective roof made of galvanized steel for BOX BD PLUS, BOX BV PLUS, BVFC F400 and BOX BV
MANUFACTURING FEATURES
• Structure in aluminum profile 30mm, nylon corners, galvanized sandwich panels with internal insulation rockwool (25mm thickness) class A1 (non-combustible) of 90kg/m3 density
• All panels are equipped with "fastening system" for the quick assembly and disassembly whenever required, either for cleaning, maintenance or exchanging of panels.
• Box is supplied without filters.
(Check the filter units needed for the drawer surface, BOX FILTER for KENTALBOX PLUS need 2 filter of each granulometry)
Filter cells for rough primary filtration for air treatment units or air intake grids.
• Thick synthetic media with high retention capacity pleated between 2 rigid screens.
• Large filter surface.
• Frame: galvanised,
• Maximum continuous operating temperature: 70°C
• Relative humidity: 100%
• Tested for food contact according to EC 1935/2004
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
MANUFACTURING FEATURES
• Allows duct connection.
• Made of galvanized steel.
MANUFACTURING FEATURES
• Circular outdoor flange with bird guard made of galvanized steel.
| Nº | Code | Family | Name | Qty |
|---|---|---|---|---|
| 1 | R-301002300LP4 | MOTOR | EEC1500 LP Ø5/8" | x1 |
| 2 | 301002204R120 | ELECTRONICAL DEVICE | EEC1500 1200RPM | x1 |
| 3 | R-251529383 | TURBINE | PA6 BD12/12 | x1 |
+34 972 720 150
Specific manual