50 Hz
DOUBLE INLET CENTRIFUGAL FAN WITH ELECTRONIC MOTOR EEC
MANUFACTURING FEATURES
• Galvanised steel sheet housing.
• Polyamide impeller reinforced with fibreglass in models 7/7, 9/9, 10/10 and 12/12. Galvanised steel sheet impeller for all range.
• Double inlet forward curved impeller.
• Supplied with mounting feet (included in price).
• Motor fixing with an exclusive system designed by Casals through flexible arms and silent blocks to avoid vibration. Flexible arms in compliance with the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipments).
• PM brushless motor (permanent magnets), synchronous, electronically commutated, high efficiency and low sound level. Specially designed for fans with electronic operation and control in deported box IP65.
Working range: from 400 to 1200-2000rpm (depending on the models)
Motor with IP54 protection and class F insulation. IP 65 drive case
Power: 220V ± 10% single phase
Power frequency: 50 / 60Hz
Operating temperature range: -20ºC to 50ºC
Speed control through signal 0-10V or PWM
APPLICATIONS
Designed for assembly in equipment:
• Ventilation boxes and air handling units.
• Centrifugal heaters.
• Industrial and professional kitchen hoods.
• Maximum working temperature: 50ºC.
UNDER REQUEST
• Galvanized sheet impeller
• MBI assembled
| A | B | C | D | E | F | G | H | I | J | N |
|---|---|---|---|---|---|---|---|---|---|---|
| 329 | 343 | 359 | 350 | 70.5 | 20 | 464 | 214 | 534 | 198 | 291 |
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FRATURES
• Galvanized protection grid on the outlet side to avoid the entry of objects and contact with the impeller.
MANUFACTURING FRATURES
• Motor side protection guard specially designed for low pressure direct driven fans.
• Manufactured in galvanised steel.
MANUFACTURING FRATURES
• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.
MANUFACTURING FEATURES
• To be installed in the outlet of low pressure fans (BD, BV) and made the connection to the duct easier.
• Made of galvanized seel.
UNDER REQUEST
• Possible spot welding on fans outlet.
MANUFACTURING FEATURES
• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.
| Nº | Code | Family | Name | Qty |
|---|---|---|---|---|
| 1 | R-301002200LP4 | MOTOR | EEC1500 LP Ø1/2" | x1 |
| 2 | 301002204R180 | ELECTRONICAL DEVICE | EEC1500 1800RPM | x1 |
| 3 | R-251379383 | TURBINE | PA6 BD10/10 | x1 |
| 4 | 960520100 | MOUNTING SUPPORT | S 10 | x1 |
+34 972 720 150
Specific manual