Fanware |

STAIRCASE OVERPRESSURE KIT

MANUFACTURING FEATURES

Automatic control of differential pressure and maintain it at 50Pa in a single stage according to the UNE-EN 12101-6 standard.
• It consists of a control panel (KIT PE) and an air supply unit (any fan for air supply) that will provide the stairs or the escape route with enough pressure.
• It is available for three-phase and single-phase equipment.
• The KIT PE has everything necessary to operate autonomously, so the work of the installer will be much easier and it is only necessary connecting the kit to the fan and the fire detection control panel.

KIT PE is composed of the following elements:

Frequency inverter programmed at 50 Pa
• Output frequency: 50Hz
• High precision DPT differential pressure probe.
Steel frame fitted with a 3mm double bar lock to limit external access. IP66 protection. Complies with IEC 62208, UL, CUL, BV, DNV and GL standards.
• Magneto-thermal protector
• Line and error LED
• Test pushbutton
• Operation mode selector

The selection of the overpressure kits must be made based on the maximum absorbed intensity of the fan to be regulated.

Code	Name
KPEI04V2	KIT-PE I 7A in: 230Vac II, out: 230Vac III
KPEI05V2	KIT-PE I 10A in: 230Vac II, out: 230Vac III
KPEI01V2	KIT-PE I 2,5A in: 230Vac II, out: 230Vac III
KPEI03V2	KIT-PE I 4,2A in: 230Vac II, out: 230Vac III
KPEIII03V2	KIT-PE III 5A in: 400Vac III, out: 400Vac III
KPEIII04V2	KIT-PE III 8A in: 400Vac III, out: 400Vac III
KPEIII05V2	KIT-PE III 12A in: 400Vac III, out: 400Vac III
KPEIII06V2	KIT-PE III 16A in: 400Vac III, out: 400Vac III
KPEIII07V2	KIT-PE III 23A in: 400Vac III, out: 400Vac III
KPEIII09V2	KIT-PE III 41A in: 400Vac III, out: 400Vac III
KPEIII01V2	KIT-PE III 2,2A in: 400Vac III, out: 400Vac III
KPEIII02V2	KIT-PE III 3,6A in: 400Vac III, out: 400Vac III
KPEIII08V2	KIT-PE III 29,5A in: 400Vac III, out: 400Vac III