KENTALFAN is a medium-sized plug fan with an IEC motor that completes the range of fans for integrators together with ENKELFAN EEC.
This plug fan has a state-of-the-art impeller made of galvanized sheet metal with a built-in diffuser to increase efficiency. It complies with the ecodesign requirements set by ErP 2022, thus advancing what the law indicates.
Maximum continuous working temperature: transported air and ambient 60ºC.
System prepared to comply with future European efficiency regulations (ErP).
KENTALFAN RANGE
Available sizes: impellers from Ø315 to 630mm
Maximum flow rate up to 22.300 m³/h.
Maximum pressure up to 1200 Pa.
KENTALFAN APPLICATIONS
-
Ventilation boxes
-
Installation in parallel or "grid" to easily obtain higher performance
-
UTA'S
-
Filtration units
-
Industrial machinery (refrigeration or air movement, air extraction and supply)
-
Air heaters
-
Purifiers
-
Roof fans
MANUFACTURING DIFFERENCES BETWEEN KENTALFAN AND ENKELFAN EEC
Just as KENTALFAN is a medium-sized fan, ENKELFAN EEC is smaller, with impellers from Ø155mm to Ø450mm and maximum flows of 7,000m³/h and pressures of up to 500Pa.
The ENKELFAN impeller is made of galvanized sheet metal, while ENKELFAN EEC has it made of plastic up to size Ø190 and aluminum for the rest of the sizes. In both, the impeller is self-cleaning with backward curved (reaction) blades of high performance and single inlet, direct driven. Besides, it's dynamically balanced to minimize noise and vibration.
The structure of KENTALFAN is made of galvanized sheet metal for small sizes up to Ø400mm, and the rest of the models are made of pickled sheet metal painted with black epoxy polyester. ENKELFAN EEC, on the other hand, is in all cases made of galvanized sheet metal.
IEC standard asynchronous squirrel cage motor with IP-55 protection and class F electrical insulation. Standard voltages 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers. For its part, ENKELFAN EEC is equipped with a permanent magnet EC motor.
download PDF
