Ventiladores centrífugos de alta presión / a transmisión CENTRIFUGAL HIGH PRESSURE FANS / BELT DRIVEN 444 CV092024 AATVG/N Different configurations of free shaftwithoutmotor or belt drivenmotor Eje libre sinmotor omotor a transmisiónendiferentes configuraciones 60 +info Hz ErP MANUFACTURING FEATURES • Fan made of Fe360 sheet. The fan paint finish is based onaQualicoat polyester powder coating stovedat 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºCwithpeaks of 200ºC. • Fully welded housing. • High efficiency simple inlet backward impeller with self-cleaning system made of Fe360 sheet statically and dynamically balanced. Impellers are painted with polyester primer that resists temperatures up to 300ºC. • Motorized fan with base frame (configuration 12). Full equipped fans including: motor, pulleys, belts, belts guard and shaft guard. Fitted over a base plate. IE4 motors for 75kW power or higher. • It allows adjusting the orientation locally frommodels 450 to 630. Models sizes from 710 to 1000 size the orientation is fixed. • Available positions (to be indicated in case of order): LG270, LG0, LG45, LG90, LG135, LG180, LG225, LG315, RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315. • The indicated codes correspond to the model in position LG270. APPLICATIONS Designed for inline installation, they are suitable for: • Industrial applications, extraction or injection of air. • Cooling of machines and parts. • Exhaust after filters, separators and cyclones. • Pneumatic transport. • Slightly dusty air transport. • Maximum working temperature: carried air: 200ºC, ambient: 60ºC. UNDER REQUEST • Fans for 60Hz and special voltages. • 2 speed motor. • Fan with free shaft (configuration 1) or with motor supported on the pedestal side (configuration 9). • C4 coating painting. • Hot dip galvanized. • Special steel (Cor-Ten A, Hardox...). • Inox 304 (normal or electropolished finish). • Inox 316 (normal or electropolished finish). • Cooling wheel. • Anticaloric paint. • Reinforced housing. • Fully welded housing (waterproof ). • Insulated housing. • Split casing (for big sizes). • Inspection door to facilitate maintenance and cleaning. • Drain plug. • Airtight axle. • Frontal foot. • Double suction flange. • Available in non-sparking air passage and standard motor. • Other brands of motors. This is a belt driven range, each model can be manufactured at different RPM, in case of order should be indicated the desired RPM for the correct operation of the unit and according to theneeds. CARACTERÍSTICAS CONSTRUCTIVAS • Ventilador fabricado en chapa Fe360. La pintura de los ventiladores está formulada a base de poliéster en polvo Qualicoat polimerizada a 200ºC con un grosor medio de 70micras. La resisténcia térmicamediade lapintura es de 180ºC con picos de 200ºC. • Carcasa totalmente soldada. •Ventilador centrífugo con sistema autolimpiante y rodete de álabes hacia atrás (a reacción) y simple aspiración fabricada en Fe360 equilibrada estática y dinámicamente. Las turbinas se pintan con imprimación de poliéster con una resistencia térmica de 300ºC. • Ventilador conmotor montado sobre bancada (sistema 12). Equipo completo que incluye: motor, correas, poleas, protector de transmisión y eje. Motores IE4 para potencias de 75kWomas. • Permite variar la orientación en destino, en los modelos del 450 al 630. En los tamaños que van del 710 al 1000, la orientación es fija. • Posiciones disponibles (a indicar en caso de pedido): LG270, LG0, LG45, LG90, LG135, LG180, LG225, LG315, RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315. • Los códigos indicados corresponden al modelo en posición LG270. APLICACIONES Diseñados para instalación en conducto, son indicados para: • Procesos industriales, extracción o inyección localizada. • Refrigeración de máquinas, enfriamiento de piezas. • Transporte de aire limpio o ligeramente polvoriento. • Aspiración después de filtros, separadores y ciclones. • Transporte neumático. • Temperatura máxima de trabajo en continuo: aire transportado: 200ºC, ambiente: 60ºC. BAJO DEMANDA • Ventiladores para 60Hz voltajes especiales. • Motor 2 velocidades. • Ventilador a eje libre (sistema 1) o conmotor enmochila (sistema 9). • Acabado pintura C4. • Galvanizado en caliente. • Aceros especiales (Corten, Hardox...). • Inox 304 (acabado normal o electropulido). • Inox 316 (acabado normal o electropulido). • Rodete de refrigeración. • Pintura anticalórica. • Carcasa reforzada. • Carcasa totalmente soldada (estanca). • Carcasa aislada. • Carcasa partida (para tamaños grandes). • Puerta inspección para facilitar el mantenimiento y la limpieza. • Drenaje. • Eje estanco. • Pie frontal. • Doble anillo aspiración. •Disponibles conpasodeaireantichispas ymotor estándar. • Otras marcas de motores. Estagamaesa transmisión, cadamodelosepuede fabricar a distintasRPM, encasodepedidosedebe indicar lasRPMa las quedeseaelequipoparaqueelmodeloquedecorrectamente definidoy seaadecuadoasusnecesidades.
RkJQdWJsaXNoZXIy MTE4OTIxMQ==